Special-Lite Doors and Frames
Special-Lite FRP Doors German Site  Special-Lite Flush Doors French Site

915

Vision Lites & Muntins

Sweets Product Tag ProductTAG

 

FL Series (5 unique aluminum vision lites)

Aluminum rectangular vision lites for 1-3/4” thick flush door. Aluminum can be anodized or painted. All have precision cut mitered corners to deliver a clean and tight installation. Contact us for unique or custom shapes. Designed for use on Special-Lite flush doors, but rectangular lite kits can be purchased for other manufacturers’ doors.

FL Standard
Vision lite kits have screw applied aluminum stops, and may be specified for ¼”, ½”, or 1” (6.4mm, 13mm, or 25mm) glazing. Factory or field install glazing (glass, polycarbonate, or panels). We also offer a 9-lite unit by using this vision lite with surface applied muntins. Contact us for unique or custom sizes or shapes to brand your entrance.

FL Standard with MNT-3
FL Standard vision lite kit (see above) with ½” (13mm) wide surface muntin system. Insulated 1” (25mm) glass units with internal muntins available.

FL Standard with MNT-4
FL Standard vision lite kit (see above) with 1-1/4” (32mm) wide surface muntin system. Insulated 1” (25mm) glass units with internal muntins available.

FL-SecureLite
Vision Lite kit engineered for intrusion resistance. Kits are thru-bolted to the door, but have a ‘snap’ cover for aesthetic appeal. Available with a ½” (13mm) or 1” (25mm) glass bite, for both ¼” (6.4mm) and 1” (25mm) thick glazing. Special-Lite partners with intrusion resistant glazing (polycarbonate and glass) manufacturers for most effective design. Recommended to increase School Entrance Safety.

FL-LPBev
Vision lite kit has a sleek, low profile, beveled (tapered) style. Kits have screw applied aluminum stops. Available with a ½” (13mm) glass bite, for ¼” (6.4mm) and 1” (25mm) thick glazing.

 

CL Series (1 unique aluminum vision lite)

CL-Colonial Aluminum ‘colonial’ style vision lights fabricated in sizes to match the panels of our SL-18 6-Panel Wood Grain Fiberglass Door. Kit may be specified for any or all of the 6 panels (top, mid and/or bottom). Typically painted to match the color of the door face sheet but can be anodized or painted. Available for ¼” (6.4mm) and 1” (25mm) thick glazing.

 

FLR Series (EPDM gasket vision lite system)

FLR Series vision lite system is a great way to brand your entrance with a door that will be unique. Using EPDM gasket, we design curved vision lites that may be used in all of our flush doors. Available for ¼” (6.4mm) and 1” (25mm) thick insulated glass. Doors are factory glazed and arrive ready to install. These kits may be available with aluminum glass stop – consult factory for details. Consider a round or oval half or full vision lite!

 

Vision Lite Recommendations: