AF-219FR
Rustic Wood Grain Fire-Rated Fiberglass Door (up to 90-min.)

A render of a rustic wood grain door in an oak finish.

Fire doors are a vital part of a building’s passive fire protection system. When properly installed and maintained, they will help to compartmentalize a building to protect occupants and property from the spread of smoke, flames, and aid in providing a safe means of egress during a fire. Purchasing your fire-rated doors and framing from one vendor can minimize costs and shorten lead time. 

This rustic woodgrain version (219FR) and the contemporary light maple wood grain (219FR-1) of our all fiberglass fire doors are available with 20, 45, 60, and 90 minute fire ratings. Tested in accordance with UBC 7-2, NFPA 252 and UL 10C requirements, the AF-FR Series have passed the 1-1/2 hour positive pressure test, hose stream test, and 250 degree temperature rise tests, and are labeled by Intertek.

Stainless steel vision lites provided by Special-Lite or others

Technical Information

Core

  • WSCP-412 proprietary mineral core
  • 1-1/2” nominal thickness
  • 18 pcf minimum density

Framing

  • FR-Series Framing 
  • ¼” thick, solid, pultruded, FRP profiles
  • No corrosive components or reinforcements
  • Solid tectonite filler
  • No steel or aluminum filler is allowed
  • Any category C standard frame 
  • Any category C proprietary frame

Standard Sizes

  • 4’0” x 8’0” maximum size single swing
  • 8’0” x 8’0” maximum size standard pairs

Accessories

Hardware

  • All surface-applied hardware must be through-bolted
  • Hinges Per NFPA 80, Table 6.4.3.1
  • Single-point latching on singles, 4-point latching for pairs
  • Surface vertical rod less bottom rod allowed on 45-min and lower pairs and singles with door to door or door to floor fire pin installed in each leaf
  • Brass, bronze, steel, aluminum, polycarbonate or decorative laminate maximum 12 from bottom rail
  • Astragal – Optional wood astragal

Stiles

  • Single Swing
  • Hinge and lock stile, 2” minimum tectonite with Palusol P-100 Intumescent and 0.090” thick fiberglass edge painted to match door face

Standard Pairs

  • Hinge stile, 2” minimum tectonite with Palusol P-100 Intumescent and 0.090” thick fiberglass edge painted to match door face
    • Meeting edge, 3” minimum with Palusol P-100 Intumescent and 0.090” thick fiberglass edge painted to match door face

Rails

  • Top rail, 6” minimum tectonite with Palusol P-100 Intumescent and 0.090” thick fiberglass edge painted to match door face
  • Bottom rail, 4” minimum for single swing, 4-1/2” minimum for pairs tectonite with 0.090” thick fiberglass edge painted to match door face

Product Ratings and Performance

Your first door could be free!

Enter your email now to learn more.